Loading ...
Loading ...
Loading ...
INSTALLATION OF BUILT IN COOKTOP
In order to prevent leakage of any liquids on the work bench and fix the appliance to the bench, a special
sealing tape is supplied together with your oven. Place the cooktop glass down on a clean cloth on a stable
flat surface & apply this seal around the bottom edge of the cooktop (see below). Remove the backing from
the sealing tape and then place the appliance in position. If the sealing tape is not enough to fully seal the
appliance to the bench, use a small bead of clear high temperature resistant silicone sealant.
This appliance can be installed into a workbench 30-40mm thick. When cutting the hole in the work bench,
keep in mind the correct space and ventilation which are shown in the diagrams below.
A board must be placed a minimum of 20mm below
the cooktop that prevents anyone from touching
the underside of the cooktop. Take care that there
is adequate ventilation for air exchange to the
inductive elements (at least 20mm).
NOTE: INDUCTIVE COOKTOPS GENERATE A
LOT OF HEAT INTERNALLY WHEN IN
OPERATION. THE BOTTOM OF THE APPLIANCE
MUST HAVE A CLEAR PATHWAY TO VENT THIS
HEAT OUT VIA THE BOTTOM FANS TO THE
OPEN AIR IN ORDER TO KEEP ITSELF COOL.
FAILING TO PROVIDE ADIQUATE
VENTILLATION WILL DAMAGE THE APPLIANCE
AND VOID YOUR WARRANTY. THE ABOVE
DIMENSIONS SHOULD BE CONSIDERED THE
MINIMUM VENTILLATION REQUIRED.
10
Loading ...
Loading ...
Loading ...