Loading ...
Loading ...
Loading ...
41
Error Messages
Symptoms Reason Solution
Water supply pressure is not
adequate in area.
•
Check another tap in the house.
Water supply taps are not
completely open.
•
Fully open tap.
Water supply hose(s) are kinked.
•
Straighten hose(s).
The lter of the supply hose(s)
are clogged.
•
Check the lter of the supply hose.
If water leakage occurred in the
supply hose (aqua stop hose),
indicator will become red.
•
May vary depending on the model.
Drain hose may not be installed
as per installation instructions.
•
Ensure that the drain hose is installed as
per the installation instructions.
The drain lter is clogged.
•
Clean the drain lter.
Load is too small.
•
Add 1 or 2 similar items to help balance
the load.
Feet are not adjusted correctly.
•
Adjust the front feet(or foot) so that there
is no rocking from corner to corner.
The appliance has an imbalance
detection and correction system.
If individual heavy articles are
loaded (e.g. bath mat, bath
robe, etc.) this system may stop
spinning or even interrupt the
spin cycle altogether.
•
Rearrange load to allow proper spinning.
If the laundry is still too wet at
the end of the cycle, add smaller
articles of laundry to balance the
load and repeat the spin cycle.
•
Rearrange load to allow proper spinning.
Loading ...
Loading ...
Loading ...