Loading ...
Loading ...
Loading ...
25
Add Item
Use this function to add loads or remove the foreign
material.
1
Press the
Add Item
button.
2
Close the door after add loads or remove the
foreign material (e.g. coin or pin etc.)
3
Press the
Start/Pause
button.
•
Results when choosing
Add Item
during cycles.
- When the tub is spinning : Tub stops and
Door Lock
is off.
- When water temperature in the tub is higher than
45°C :
Add Item
is not available with short warning
sound for safety.
- When lots of water is in the tub :
Door Lock
is off
after draining by safe water level.
NOTE
•
Open the door when
Door Lock
is off after checking
the safety.
•
Add Item
doesn't work when Tub Cleaning course is
in progress for safety.
•
Put the laundry into the tub completely. Laundry
caught in between door closing part can damage door
packing (rubber part) and might cause failure.
Option Programme
Time Delay
You can set a time delay so that the washing machine
will start automatically and nish after a specied time
interval.
1
Press the
Power
button.
2
Select a washing programme.
3
Press the
Time Delay
button and set time required.
4
Press the
Start/Pause
button.
NOTE
•
The delay time is the time to the end of the
programme, not the start. The actual running time may
vary due to water temperature, wash load and other
factors. Do not use Liquid detergent for this operation.
Turbo Clean™
Adding the Turbo Clean™ option reduces cycle time and
provides good performance in normal cycle. Using Turbo
Clean™ saves time without sacricing performance.
1
Press the
Power
button.
2
Select a washing programme.
3
Press the
Turbo Clean™
button..
4
Press the
Start/Pause
button.
NOTE
•
Turbo Clean™ function of Some courses is selected
automatically.
Loading ...
Loading ...
Loading ...