Loading ...
Loading ...
Loading ...
452 IN CASE OF EMERGENCY
Rear Tail/Stop, Turn Signal And Backup Lamps
1. Remove the two screws and push pins that pass through
the bed sheet metal.
Tail Lamp Locations
2. Pull the outboard side of the lamp rearward far enough to
unsnap the two receptacles on the outboard side of the
lamp housing from the two plastic snap post retainers in
the outer box side panel.
Tail Lamp Removed
3. Disconnect the wiring harness connectors from the bulb
socket.
1 — Tail Lamp
2 — Fasteners
1 — Tail Lamp Housing
2 — Bulb Socket Locations
Loading ...
Loading ...
Loading ...