Loading ...
Loading ...
Loading ...
Archer C5
AC1200 Wireless Dual Band Gigabit Router
(USB 2)
Flashing
The router is identifying the device connected to the USB 2.0
port.
On The device is identified successfully.
Off No device is connected to the USB 2.0 port.
Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on
for about 5 minutes and then turn off.
1.4.2 The Rear Panel
Figure 1-1 Rear Panel sketch
The following parts are located on the rear panel (View from left to right).
Power: The Power socket is where you will connect the power adapter. Please use the power
adapter provided.
On/Off: The switch for the power.
Wi-Fi on/off: The button for the wireless function.
USB 1/2: The USB 2.0 ports connects to a USB 2.0 storage device or a USB 2.0 printer.
Internet: This port is where you will connect the DSL/cable Modem, or Ethernet.
Ethernet (1, 2, 3, 4): These ports (1, 2, 3, 4) connect the router to the local PC(s).
WPS/Reset:
Pressing this button for less than 5 seconds enables the WPS function. If your client devices,
such as wireless adapters, that support Wi-Fi Protected Setup, then you can press this button
to quickly establish a connection between the router and client devices and automatically
configure wireless security for your wireless network.
- 5 -
Loading ...
Loading ...
Loading ...