Loading ...
Loading ...
Loading ...
30
CONDITION POSSIBLE CAUSE POSSIBLE SOLUTION
The Air Quality
Indicator is blinking.
The Revive requires service.
Contact the Brondell Service Center
at 888-542-3355.
CONDITION POSSIBLE CAUSE POSSIBLE SOLUTION
There is an odor
eminating from
the Revive.
The Humidifying Components
have not been properly cleaned or
maintained.
See pages 25–26 for instructions
on proper care of the Humidifying
Components.
CONDITION POSSIBLE CAUSE POSSIBLE SOLUTION
The Revive runs
only in Fan Speed
3 or 4 while
humidifying is
active.
The air quality in the room is poor,
or the humidity level is low.
Put the Revive into Fan Speed
Mode, or Manual Mode. You can
also empty the Water Tank to stop
the Revive from humidifying (see
page 15).
CONDITION POSSIBLE CAUSE POSSIBLE SOLUTION
Airflow has
diminished, even
at high fan speeds.
Plastic packaging on filters was not
removed.
Remove the plastic packaging and
put the filters back in.
Blockage at Air Inlet or Air Outlet.
Contact the Brondell Service Center
at 888-542-3355.
Filters are due for replacement. Replace with a new filter set.
Clearance around air purifier is not
adequate for air ventilation.
Ensure that there is clearance of 20
inches on each side and 4 inches
behind the air purifier.
Missing filters or filters were inserted
in the wrong order.
Ensure the filters are placed in the
correct order (see pages 8–9).
Recommended room size has been
exceeded.
Suggested coverage area is a
medium-to-large room.
TROUBLESHOOTING cont.
Loading ...
Loading ...
Loading ...