Loading ...
Loading ...
Loading ...
14
PREPARING FOR FIRST USE
Be sure to remove the plastic wrapping from the filters in the front and back of the
Revive before turning it on.
This product is for indoor use only.
When the unit is not in use, unplug it from the electrical outlet.
INSTALLING THE FILTERS
1. Remove the Front Cover by pulling the top of the cover
towards you. Lift up to disengage the bottom hinges.
2. Remove the Mesh Pre-Filter by pressing down on the two
tabs at the top of the filter, then pull the filter out of the
machine. Remove the other two filters.
3. Remove the plastic wrapping from the Active Carbon and
True HEPA filters.
4. Put the filters back into the machine in the following order,
ensuring that the pull-tabs on the True HEPA and Active
Carbon Filters face forward:
a. True HEPA Filter (this goes in first)
b. Active Carbon Filter
c. Mesh Pre-Filter
5. Put the Front Cover on the Revive. Be sure it is seated
correctly, as the unit will not power on if the Front Cover is
not secure.
6. Remove the Back Cover by pulling down on the
indentation at the top and lifting it away from the body of
the machine.
7. Remove the Specialized and True HEPA Filters from the
machine and remove the plastic wrapping from both
filters.
8. Put the filters back into the machine in the following
order, ensuring that the pull-tabs on the True HEPA and
Specialized Filters face forward:
a. True HEPA Filter (this goes in first)
b. Specialized Filter
9. Put the Back Cover on the Revive and ensure it is securely
in place.
Step 1
Step 3
Step 6
Loading ...
Loading ...
Loading ...