Loading ...
Loading ...
Loading ...
8
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Before You Start
Note the tools you will need before you begin�
Remove any packaging material or protective plastic from
components�
Check for damaged or missing parts, and consult your
retailer if necessary�
Mobile carts and trolleys are optional� You should follow
the separate instructions that came with the trolley before
assembling and installing your barbecue�
adjustable spanner / wrench
Phillips Head Screwdriver
Check The Cross Lighting Channels
The cross lighting channels should already be in place� If
they are not, or if they moved during shipping, they need to
be replaced as follows: place each cross-lighting channel
onto the back support panel� The keyed tabs on the bottom
of each cross-light channel fits into the slots on the burner
support rail� The cross lighting channels are required for
all models�
Check The Burners
The burners should already be fitted to the barbecue� If they
are not, or if they moved during shipping, they need to be
replaced as follows:
Remove the retaining clip from the burners� Fit the burners,
open end first, over the stem of the control valves at the front
of the barbecue� Lower the other end of the burner so the
lug locates into the corresponding hole at the rear of the
barbecue�
Replace the retaining clips into the burner lugs so the
burners stay in position� You need to do this from behind the
barbecue, underneath the back panel�
Fit The Vaporizers
The Vaporizers are designed to vapourise fats and juices
from your food� The Vaporizers reduce flare-ups and help to
add that great barbecue flavour�
To install the Vaporizer(s), remove all plastic and/or
cardboard packaging material and place the Vaporizer
into position on the right hand side of the barbecue� The
Vaporizers must be fitted to the same side of the barbecue
as the grill� They will not work if fitted under the solid plate�
Note: Vaporizer grid style may vary between barbecues
Fit The Cooking Plates And Grills
We recommend fitting the solid plate to the left-hand side
of the barbecue frame (with the drain hole on the right hand
side)� The grills can be fitted to any side of the barbecue
frame�
IMPORTANT: the grills must always be positioned over the
Vaporizers�
This appliance is designed to ventilate air through the
barbecue while it is operating� Do not fit additional cooking
plates to the top of the barbecue� Doing so will prevent the
unit from ventilating and will cause serious damage to the
barbecue�
Loading ...
Loading ...
Loading ...