Loading ...
Loading ...
Loading ...
Cleaning and maintenance aus
27
Terminating the programme
(Reset)
Ter minating the pr ogr amme
1. Press the START button P and
hold it down for about 3 seconds.
The value ‹:‹‚ appears in the
display window h. The
programme sequence lasts about
1 minute. The value ‹:‹‹ appears in
the display window h.
2. Switch off ON/OFF switch (.
Changing the programme
When the START button P has been
pressed, the programme cannot be
changed. The only way a programme
can be changed is by Cancel
programme (Reset).
ExtraDry
The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Be careful if you have delicate
tableware)
Here’s how to change the setting:
1. Switch on ON/OFF switch (.
2. Hold down the programme button
# and then repeatedly press the
START button P until š:‹...
appears in the display window h.
3. Release both buttons.
4. By pressing the 3 button you can
switch intensive drying on š:‹‚ or
off š:‹‹.
5. Press START button P.
The set value is saved.
2 Cleaning and
maintenance
Cl ea ni ng and mai nt enance
A regular inspection and maintenance
of your machine will help to prevent
faults. This saves time and prevents
problems.
Overall status of the
dishwasher
*The interior of your dishwasher is
predominantly self-cleaning. In order to
remove deposits, your dishwasher
automatically changes the running of
the programme (such as by increasing
the cleaning temperature) at certain
intervals. This will lead to higher
consumption values when running this
programme.
*Depending on the features of your
dishwasher
If you should find deposits in the
interior of the dishwasher in spite of
this, remove these deposits as
follows:
1. Fill the detergent dispenser 1j with
detergent.
2. Select the programme with the
highest temperature.
3. Start the programme without dishes.
:Warning
Health hazard due to detergents
containing chlorine!
Always use chlorine-free detergents.
Loading ...
Loading ...
Loading ...