Loading ...
Loading ...
Loading ...
aus Operating the appliance
26
Programme end
The programme has finished when the
value ‹:‹‹ appears in the display
window h.
Auto Power Off (Automatic
switch off after end of
programme)
Au t o Po wer Of f
To save power you can set the
dishwasher to switch off automatically
from 1 minute to 120 minutes after the
end of its programme. You can choose
a setting from ˜:‹‹ to ˜:‹ƒ.
Here’s how to change the setting:
1. Switch on ON/OFF switch (.
2. Hold down the programme button
# and then repeatedly press the
START button P until š:‹...
appears in the display window.
3. Release both buttons.
The LED of the # button flashes
and the digital display h lights up
to show the value š:‹....
4. Press the programme button #
repeatedly until the value ˜:‹...
appears in the display window h.
5. Press the programme button 3.
Each time the button is pressed, the
set value increases by one level;
when it reaches the value ˜:‹ƒ the
display jumps back to ˜:‹‹.
6. Press START button P.
The set value is saved.
Switching off the appliance
Shortly after the end of the
programme:
1. Switch off ON/OFF switch (.
2. Turn off water supply (does not
apply to appliances with Aqua-Stop).
3. Remove the utensils when they have
cooled down.
Note: When the programme ends,
leave the appliance to cool down a
while before opening it. This will prevent
steam from escaping and causing
long-term damage to your built-in
furniture.
Interrupting the programme
Caution!
Expansion (overpressure) may cause
the appliance door to jump open and/or
water to escape! If the door was opened
on an appliance which has a hot water
connection or is heated, always leave
the door ajar for several minutes and
then close it.
1. Switch off ON/OFF switch (.
The LEDs go out. The programme is
saved.
2. Switch on the ON/OFF switch (
again to continue the programme.
˜:‹‹ Appliance does not switch off
automatically.
˜:‹‚ Appliance switches off after 1
minute.
˜:‹ƒ The appliance switches off after
120 minutes.
Loading ...
Loading ...
Loading ...