Loading ...
Loading ...
Loading ...
REFRIGERATOR USE
22
When Temperature mode is activated, press TEMP to toggle
between Fridge and Freezer. The display will show the
temperature set point of the selected compartment, and
temperature adjusting information will appear on the display
screen.
Recommended Refrigerator Temperature
Recommended Freezer Temperature
Adjust Temperature Set Points
Refrigerator set point range: 33°F to 45°F (0°C to 7°C).
Freezer set point range: -5°F to 5°F (-21°C to -15°C).
1. After Temperature mode is activated, press TEMP again
to Select Zone (Fridge or Freezer). The display will show
the temperature set point of the selected compartment, as
shown.
2. Press LOCK to raise the set point, or press OPTIONS to lower
the set point.
3. When you have nished viewing (and adjusting if desired)
the Fridge zone set point, press TEMP, under Select Zone, to
change the display to show the Freezer zone set point. When
the zone has been changed, “FREEZER” appears on the
display screen.
4. Press the LOCK button to raise the set point, or press the
OPTIONS button to lower the set point.
Save/Conrm Temperature Settings
■ When you have nished adjusting both the refrigerator and
freezer set points, press FAST ICE to conrm and to save the
settings.
NOTE: To exit Temperature mode without saving changes, press
the ICE/WATER button under Back at any time, or allow about
60 seconds of inactivity. The temperature mode will turn off
automatically and return to the normal screen.
When adjusting temperature set points,
use the following chart as a guide
CONDITION: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Setting 1°
higher
REFRIGERATOR too warm REFRIGERATOR Setting 1°
lower
FREEZER too cold FREEZER Setting 1° higher
FREEZER too warm /
Too little ice
FREEZER Setting 1° lower
Cooling On/Off
Your refrigerator and freezer will not cool when cooling is turned
off.
■ To turn Off cooling, press and hold LOCK and FAST ICE at
the same time for 3 seconds. “Cooling Off” will blink seven
times and then remain lit as shown.
IMPORTANT:
■ To avoid unintentionally locking the dispenser or changing
other settings, press both buttons at exactly the same
time.
■ When cooling is off, the dispenser paddles and all
controls except Lock and Fast Ice are disabled.
■ When cooling is off, press and hold LOCK and FAST ICE
for 3 seconds to turn On cooling.
Options
Press the OPTIONS button to open the Options menu and select
between Filter Status or Vacation mode.
Press the ICE/WATER button, under “Back,” at any time to return
to the Home screen.
A
A. Press LOCK and FAST ICE at the same time.
Loading ...
Loading ...
Loading ...