Loading ...
Loading ...
Loading ...
20
In a normal state
The Status Monitor displays the condition of the
projector in three lines.
: Displays the condition of the projector.
While the lamp is on, the selected port is
displayed.
Displayed conditions are as below;
STANDBY: The projector is in standby mode.
WARM UP: The projector is warming up.
SEARCHING: The projector is searching an input signal.
COOL DOWN: The projector is cooling down.
: Displays the condition of the detected input signal while the lamp
is on. Otherwise, displays the serial number of the projector.
Displayed conditions are as below;
SYNC OUT: Detected input signal is out of specied range.
NO SIGNAL: There is no input signal.
CONNECTED: The projector has connected to the network or the computer
and some image is transferred to the projector while the LAN or USB TYPE
B port is selected.
HOLD: The projector has connected to the network but no image is transferred
while the LAN port is selected.
NOT CONNECTED: The projector is not connected to the network or the
computer while the LAN or USB TYPE B port is selected.
Status Monitor <Only for CP-X8160, CP-WX8250 and CP-WU8450>
Status Monitor
Displaying the condition of the projector
The Status Monitor is the sub LCD in the rear panel of
CP-X8160, CP-WX8255 and CP-WU8450. The Status
Monitor displays the present condition of the projector
including errors, setup information and error history.
<Only for CP-X8160, CP-WX8255 and CP-WU8450>
If no buttons have been operated, the Status Monitor displays as below depending
on the condition of the projector.
Status Monitor
1st line
2nd line
• The Status Monitor displays nothing while the projector is in standby
mode if the STANDBY MODE item of SETUP menu is set to SAVING (
54).
• When INSTALLATION in the SETUP menu is set to FRONT / CEILING or REAR /
CEILING, the contents on the Status Monitor are displayed upside down (
53).
NOTE
(continued on next page)
example
9
2 3 ° C
#
1 2 3 4 5 6 7 8 0 A B
S T A N D B Y
Loading ...
Loading ...
Loading ...