Loading ...
Loading ...
Loading ...
Selecting additional settings
55
In settings mode, certain settings
can be adjusted and functions selected,
allowing you to adjust the machine to
suit your requirements.
The following section only describe the
functions in settings mode that re-
quire further explanation.
The door alarm and other warnings
are automatically disabled when the
appliance is in settings mode .
Switching Keypad Lock on or
off /
Switch on Keypad Lock if you wish to
protect your appliance from unwanted
temperature changes or other uninten-
tional adjustments in settings mode .
In settings mode , use the and
arrow buttons to select Keypad Lock
and touch OK to confirm your selec-
tion.
Use the arrow buttons and to
switch the keypad lock On or Off and
confirm your selection with OK.
The keypad lock will not be activated
until you close the appliance door.
Nothing will appear in the display to in-
dicate that the keypad lock is switched
on.
The message Press OK for 6 seconds to
unlock will appear in the display if you
select a sensor control while the keypad
lock is switched on.
Follow the instructions on the display.
The display is unlocked briefly so you
can adjust the settings as required.
Closing the appliance door will reacti-
vate the keypad lock.
Switching Eco Modeon or
off
Eco Modeis useful when going on vaca-
tion, for example, if you do not wish to
switch off the appliance completely or
do not need a high degree of cooling.
Energy consumption inEco Mode is
lower than in normal operation.
The freezer section is regulated to a
temperature of 3°F (-16°C).
If the SuperFrost function is switched
on, these will be automatically switched
off whenEco Mode is selected.
In settings mode, use the and
arrow buttons to selectEco Mode and
selectOK to confirm your selection.
Use the and arrow buttons to
switchEco Mode On, orOff and con-
firm your selection withOK.
The change in temperature to 3°F
(-16°C) on the display is the only indica-
tion that Eco Modeis switched on.
Tip: You can also switch off the Eco
Modefunction by directly adjusting the
temperature (see “Setting the temper-
ature” in “The correct temperature”).
Loading ...
Loading ...
Loading ...