Loading ...
Loading ...
Loading ...
Water connection
42
Installing the water hose to the
appliance
Before establishing the plumbed-wa-
ter connection, ensure that the appli-
ance is disconnected from the power
supply.
When installing the water hose, make
sure that it is neither kinked nor dam-
aged.
By this time, the installation niche
should already have been prepared so
that the appliance needs only to be
pushed into it.
Position the appliance slightly in front
of the installation niche so that the
shut-off valve can still be accessed.
2
The water connection of the appli-
ance is ready for connection at the
rear of the appliance.
Install the water hose onto the wa-
ter connection at the rear of the
appliance. Ensure that the connec-
tions are tight and leak-proof.
7/16"
2
Connect the water hose to the
shut-off valve.
Ensure that it is properly screwed into
position.
Slowly open the shut-off valve in the
water supply line and check the
whole water system for leaks.
The appliance can now be installed in
the niche (see “Installation”).
The appliance can now be connected
to the power supply (see “Electrical
connection”).
Loading ...
Loading ...
Loading ...