Loading ...
Loading ...
Loading ...
DOWNDRAFT VENTILATION
USING DOWNDRAFT VENTILATION
ACTIVATION
• To activate the downdraft, press the UP/DOWN button on the control module.
• Once the UP/DOWN button is pressed, the downdraft blower will turn on at the last speed used or on low for first-time use.
BLOWER SPEED
• To adjust the speed of the blower, press the HIGH, MEDIUM or LOW button.
• The corresponding LED will illuminate to indicate the blower speed.
• To initiate boost mode, press and hold the HIGH+ button for 5 seconds. Boost increases airflow by approximately
20 percent more than high but is limited to 10 minutes. After 10 minutes, the blower will automatically transition to high.
DELAY FEATURE
The delay feature continues blower operation for approximately five minutes after use, then automatically turns the unit off. If the blower was
operating on high or medium speed, the blower will transition to the next lowest setting for five minutes before turning off. The chimney will
stay up until the UP/DOWN button is pressed.
1
1
2
2
3
Loading ...
Loading ...
Loading ...