Loading ...
Loading ...
Loading ...
3
9. The appliance shall not be
operated WITHOUT FOOD IN
THE OVEN.
Operation in this manner may
damage the appliance.
10. If smoke or a re occurs in the
oven, press Stop/Reset, and
leave the door closed in order
to stie any ames.
Disconnect the power cord, or
shut off the power at the fuse or
the circuit breaker panel.
11. The oven lamp must be
replaced by a service
technician trained by the
manufacturer. Do not attempt to
remove the outer casing from
the oven.
Installation
Examine your microwave oven
Unpack the oven, remove all
packing material, and examine the
oven for any damage such as dents,
broken door latches or cracks in the
door. If you nd any damage, notify
your dealer immediately. Do not
install a damaged microwave oven.
Earthing instructions
IMPORTANT: THIS UNIT HAS TO
BE PROPERLY EARTHED FOR
PERSONAL SAFETY.
If your AC outlet is not earthed, it is
the personal responsibility of the
customer to have it replaced with a
properly earthed wall socket.
Operation voltage
The voltage has to be the same as
specied on the label on the oven. If a
higher voltage than specied is used,
it may cause a re or other damages.
WE CERTIFY THAT THIS
MICROWAVE OVEN HAS BEEN
INSPECTED AND COMPLIES
WITH THE REQUIREMENTS OF
REGULATION 3,
SUBCLAUSE(2), OF THE
MICROWAVE OVENS
REGULATIONS 1982.
(This statement applicable only to
New Zealand.)
Placement of the oven
This appliance is intended to be
used in household and similar
applications such as:
• staff kitchen areas in shops, ofces
and other working environments;
• farm houses;
• by clients in hotels, motels and
other residential environments;
• bed and breakfast type environments.
1. Place the oven on a at and
stable surface, more than
85 cm above the oor.
The appliance is freestanding
type and shall not be placed in
a cabinet.
2. When this oven is installed, it
should be easy to isolate the
appliance from the electricity
supply by pulling out the plug or
operating a circuit breaker.
Loading ...
Loading ...
Loading ...