Loading ...
Loading ...
Loading ...
15
Using the Warm Function
Step 1. Turn the Function Dial to the Warm
function. When you
select the Warm function, the lower heating elements will
heat.
Default Temperature: 65˚C.
Default Time: 60 minutes.
You may manually activate the Turbo Convection Heat by
pressing the Turbo button once to turn it on. The blue
light of the Turbo button will turn on.
Step 2. To set the temperature:
Turn the Temperature Dial if you wish to increase or
decrease the temperature setting. For the Warm Function,
the temperature can be set from 65˚C to 95˚C in 15-degree
increments.
Step 3. To set the time:
Turn the Time Dial if you wish to increase or decrease
the cooking time. The maximum time setting for Warm
is 60 minutes (1 hour). Once you have selected the
desired cooking time, press the Start button to initiate the
pre-heating process.
Step 4. To Start:
Press the Start/Cancel Button to start the warming process.
The red Start/Cancel button light will illuminate. The LCD
Display will show the Warm Function, the countdown time
and the selected temperature. The oven will begin to heat
and the timer will start counting down. When the Warm
function cycle is complete, the oven will emit 3 ‘beeps’. The
LCD and the Start/Cancel Button Light will turn off after 30
seconds.
NOTE: You can cancel the warming cycle at any time by pressing the
Start/Cancel Button once. The red Start/Cancel Button light will turn
off whenever a function has been completed or a function is manually
cancelled.
Loading ...
Loading ...
Loading ...