Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY 125
Replacing Exterior Bulbs
Headlamps Low Beam And High beam
1. Remove one retaining screw on the lower
headlamp filler panel. Remove filler panel.
2. Remove two retaining screws on the upper
headlamp filler panel. Remove filler panel.
3. Remove one upper retaining screw from the
headlamp housing.
4. Remove two lower retaining screws from
the headlamp housing.
5. Pull Headlamp forward, disconnect harness
electrical connector and remove the head-
lamp assembly from vehicle.
6. Remove appropriate plastic cap from the
back of the headlamp housing.
7. Push down on the upper portion of the
socket.
8. Pull the socket outward from reflector.
9. Pull bulb outward from socket.
10. Install new bulb.
11. Push socket back into reflector until it locks
back into place.
12. Install access cap.
13. Carefully reinstall headlamp in the same
position on the vehicle, so as not to affect
headlamp aiming.
14. Install one upper retaining screw on the
headlamp housing.
15. Install two lower retaining screws on the
headlamp housing.
16. Carefully reinstall the lower headlamp filler
panel and one retaining screw.
17. Carefully reinstall the upper headlamp filler
panel and two retaining screws.
Front Turn Signal/Parking Lamps
1. Remove one retaining screw on the lower
headlamp filler panel. Remove filler panel.
2. Remove two retaining screws on the upper
headlamp filler panel. Remove filler panel.
3. Remove one upper retaining screw from the
headlamp housing.
4. Remove two lower retaining screws from
the headlamp housing.
5. Pull Headlamp forward, disconnect the
harness electrical connector and remove
the headlamp assembly from vehicle.
6. Rotate the bulb counterclockwise and
remove.
7. Install the bulb into socket, and rotate bulb/
socket clockwise into lamp locking it in
place.
8. Carefully reinstall headlamp in the same
position on the vehicle, so as not to affect
headlamp aiming.
9. Install the one upper retaining screw on
headlamp housing.
10. Install the two lower retaining screws on
headlamp housing.
11. Carefully reinstall the lower headlamp filler
panel and one retaining screw.
12. Carefully reinstall the upper headlamp filler
panel and two retaining screws.
6
20_VF_OM_EN_US_t.book Page 125
Loading ...
Loading ...
Loading ...