Loading ...
Loading ...
Loading ...
www.BISSELL.com
8
Attaching the BarkBath
™
Tool
Holding the tool right
side up, add BISSELL
No-Rinse Dog Shampoo
to the shampoo reservoir.
Unscrew the cap
to the shampoo
reservoir to
unattach it from
the bathing tool.
1
2
Align the
screw cap with
the tabs of
the reservoir
opening and
twist shut.
3
4
Locate the bathing tool
and BISSELL No-Rinse
Dog Shampoo.
Holding the tool horizontally on a flat
surface (such as a table or counter top),
attach the bathing tool to the cleaner by
inserting the flex hose connector into the
shampoo tool connector. You will hear a
“click” when it locks into place.
5
6
NOTICE: Dish soap, traditional dog or human shampoos and/or conditioners
should not be used as they may be too thick and may damage the machine. Use
only BISSELL No-Rinse Dog Shampoo in your BarkBath™ tool. Use of shampoos
or soaps which contain lemon or pine oil may damage this appliance and void
the warranty. These products may react with the plastic materials used in your
cleaner, causing cracking or pitting.
NOTE: The “factory setting” of the spray nozzle is optimized for use on most hair
lengths/types with the exception of thick/heavy/dual and longer coated dogs.
TIP: Since every dog is unique, first start by adding a small amount of BISSELL
No-Rinse Dog Shampoo to reservoir. Continue to add more shampoo as needed
to eectively clean your dog.
Prime the tool by pointing the nozzle
at the microfiber mat and pressing
and holding the spray trigger for 15-20
seconds to allow solution to dispense.
Loading ...
Loading ...
Loading ...