Loading ...
Loading ...
Loading ...
www.BISSELL.com
10
Bathing Your Dog (continued)
Prime the tool by pointing the nozzle
at the microfiber mat and pressing
and holding the spray trigger for 15-20
seconds to allow solution to dispense.
Set the Rinse/Shampoo switch to the
desired setting. For Shampoo, the reservoir
will dispense a mixture of shampoo and
water; for Rinse, it will dispense just water.
8
Press and hold the spray
trigger while gently stroking
the nozzle of the bathing
tool downwards, following
the fall of the dog’s coat.
Spray shampoo/water on the microfiber
towel and hand clean delicate areas such
as the dog’s face and paws.
7
Release the spray trigger
and use “drying strokes”
to suction up moisture
from the dog’s coat.
Repeat as needed.
As a final step, coat should be air-
or towel-dried as needed.
NOTE: The Dog Bathing Tool is always extracting dirty water. The trigger
dispenses the shampoo and/or water. While pressing the trigger, it also continues
extracting dirty water.
4
9
5
Place the tool directly
onto the dog’s coat before
pressing and holding the
spray trigger to release
the shampoo/water onto
your dog’s coat.
6
10
Loading ...
Loading ...
Loading ...