Loading ...
Loading ...
Loading ...
www.BISSELL.com
11
Cleaning Your BarkBath
™
After Use
WARNING
To reduce the risk of electric shock, turn power OFF on your cleaner and disconnect plug
from electrical outlet before performing maintenance or troubleshooting.
NOTICE: Do not submerge BarkBath™ tool in water or other liquid.
2
Remove and
rinse out the
dirty water
tank following
instructions in the
“Emptying the
Dirty Water Tank”
section.
1
Turn power switch to the OFF (O) position
and unplug power cord from outlet.
Once removed from flex
hose, keep tool elevated
to avoid dripping water on
floor and rinse clean under
running water.
Press release button and
disconnect flex hose from
the dog bathing tool by
pulling straight out. (DO
NOT twist tool to remove.)
6
Be sure all pieces are
completely dry before
returning to base unit
and before storage.
5
Check spray nozzle for
accumulated dirt or
debris. If necessary, clean
with soft bristle brush.
You may disassemble the
spray nozzle for cleaning
as needed. Removing the
faceplates will expose
longer spray nozzles.
7
3
4
8
Flip tool to release water
into sink. While holding the
tool in the air and reservoir
in the sink, press the trigger
to assure all water empties
from the hose.
Loading ...
Loading ...
Loading ...