Loading ...
Loading ...
Loading ...
www.BISSELL.com
6
Preparing Your Cleaner*
WARNING
Do not plug in your BarkBath™ until you are familiar with all the safety and operating
instructions.
Flip the tank so the
black cap is on top
and unscrew. Pull
up to remove cap
assembly from tank.
1
2
Fill the clean
water tank with
warm tap water
to the fill line.
Replace the
cap and return
the tank to the
machine.
NOTICE: For optimal performance of your cleaner and the safety of your dog, you will
need to thoroughly rinse your carpet cleaner before every use of the BarkBath™ tool to
ensure all internal components of your cleaner are free of carpet cleaning formulas. Follow
these steps for flushing out your cleaner.*
*Little Green cleaner shown. Appearance may vary by model.
Remove the clean
water tank by
lifting it straight
up and then away
from the unit.
Rinse the clean water
and formula tank,
along with all tank
components (cap,
tubing, etc.) with
warm tap water.
Repeat as necessary
to be sure all residual
carpet cleaning
formula is removed.
3
4
Plug the unit in
and press the
power switch to
ON ( I ) position.
Before connecting
the bathing tool, you
will need to prime
the system. Place the
unit on a high, flat
surface (such as a
table or counter top).
Hold the flex
hose end over the
microfiber mat or
towel and press the
trigger at the end
of the flex hose
for 15-20 seconds
to allow water to
dispense.
5
6
7
8
Turn the unit
OFF, pressing
the power switch
to ( O ) OFF
position.
Loading ...
Loading ...
Loading ...