Loading ...
Loading ...
Loading ...
6
–
46
Maintenance and Care
Owner Maintenance
4. Pull the center of each plastic retainer
using a fl athead screwdriver and
remove the retainers, and then partially
peel back the mudguard.
Removal
Installation
5. Turn the socket and bulb assembly
counterclockwise and remove it.
6. Disconnect the bulb from the socket.
7. Install the new bulb in the reverse order
of the removal procedure.
Rear turn signal lights, Brake lights/
Taillights/Rear side-marker lights (Type
B)
1. Make sure the ignition is switched off,
and the turn signal switch is off.
2. Wrap a small fl athead screwdriver with
a soft cloth to prevent damage to the
cover, and then remove the cover with
the fl athead screwdriver.
3. Turn the bolts counterclockwise and
remove them.
CX-5_8FN1-EA-16L_Edition1.indb 46 2016/12/12 10:07:14
Loading ...
Loading ...
Loading ...