Loading ...
Loading ...
Loading ...
23
4 Permanent settings in programming mode
Product Coffee
strength
Amount Temperature
‘Espresso doppio’
(2 brewing operations)
8 levels Water: 30ml–160ml normal, high
‘Cappuccino’ 8 levels Water: 25ml–240ml
Milk foam: 3sec.–120sec.
normal, high
‘Macchiato’ 8 levels Water: 15ml–80ml
Milk foam: 3sec.–120sec.
normal, high
‘Milk foam’ – Milk foam: 3sec.–120sec. –
‘Hot water’ – Water: 25ml–450ml low, normal, high
Permanent settings in programming mode always follow the same
model.
Example:Proceed as follows to change the coffee strength for one
coffee.
Precondition:The start screen is displayed.
T Press the
‘ Pc ’ button.
T Press the
‘>’ button several times until page ‘3/4’ is
displayed.
T Press the
‘Expert mode’ button.
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To display more products, press the
‘>’ button.
T Press the
‘Coffee’ button.
T Press the
‘Coffee strength’ button.
T Press the
‘<’ or ‘>’ button to change the setting for the cof-
fee strength.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘’ button for around 2 seconds to exit program-
ming mode.
Loading ...
Loading ...
Loading ...