Loading ...
Loading ...
Loading ...
15
2 Preparation
T Place two cups under the coffee spout.
T Press the
‘Espresso’ button twice (within 1 second).
‘2xEspresso’, the preset amount of water flows into the
cups.
Example:Proceed as follows to prepare one cappuccino.
Precondition:The start screen is displayed. Milk is connected to the
fine foam frother.
T Place a cup under the coffee spout and the fine foam frother.
E When preparing a macchiato, depending on the size of the
cup, the cup may need to be moved to under the coffee spout
after the milk foam has been prepared.
T Press the
‘Cappuccino’ button.
As soon as the machine has heated up,
‘Open switch’
appears.
T Turn the switch to the§ position.
The milk foam is prepared.
‘Close switch’
T Turn the switch to the °position.
The preset amount of water for espresso flows into the cup.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 ‘Maintenance – Cleaning the fine foam frother’).
For the ‘caffè Barista’ and ‘lungo Barista’, blend the coffee with hot
water. This results in a full-bodied speciality coffee which is particu-
larly easy to digest. You can change the amount of this additional
water (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
Example:Proceed as follows to prepare a ‘caffè Barista’.
Precondition:The start screen is displayed.
Cappuccino and
macchiato
Caffè Barista and lungo
Barista
Loading ...
Loading ...
Loading ...