Loading ...
Loading ...
Loading ...
Adjacent units Adjacent units must be made of non-combustible
material. The fronts of adjacent units must be
resistant to temperatures up to at least 90 °C. If the
appliance is fitted close to other units, the minimum
distances specified in the picture must be maintained.
8
Installation
This appliance is always supplied with a set of
a
d
justable feet and, depending on the model, with a
splash guard.
The appliance may also be used without the splash
guard.
Fitting the adjustable feet
Beforehand:
•
Remove all parts that are not permanently fixed,
especially the pan supports and burners.
•
Remove the accessories from the oven.
Pro
ceed as follows:
•
Tilt the appliance by raising one side slightly from
t
h
e floor.
•
With the plates in position, screw the adjustable
feet into the mounting holes on the underneath of
the appliance.
•
Repeat the process on the other side.
You can make the final adjustments to the feet in
order to level the appliance once the gas and
electricity supply have been connected.
If it is necessary to pull the appliance, screw the
adjustable feet in fully. Make the final settings only
when the other installation tasks have been
completed.
9
Loading ...
Loading ...
Loading ...