Loading ...
Loading ...
Loading ...
indicator shows “00 “ when the setting time
finished.
Setting the timer to turn cooking zones off
If the timer is set on one zone:
1. Touching the heating zone selection control
that you want to set the timer for.
2. Touch timer control , the “10” will show in the
timer display. and the “0” flashes.
3. Set the time by touching the slider control. (e.g. 6)
4. Touch timer control again, the “1” will flash.
5. set the time by touching the slider control (e.g.9),
now the timer you set is 96 minutes.
6. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
7. When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
Other cooking zone will keep operating if they are turned on previously.
I
f
the timer is set on more than one zone:
1.
When you set the time for several cooking zones simultaneously, decimal
dots of the relevant cooking zones are on. The minute display shows the
min. timer. The dot of the corresponding zone flashes.
30
(set to 15 minutes)
(set to 45 minutes)
2. Once the countdown timer expires, the corresponding zone will switch off. Then
it will show the new min. timer and the dot of corresponding zone will flash.
• Touch the heating zone selection control, the corresponding timer will be shown in
the timer indicator.
Using the boiling cue control
You can use the function to boil water and it will
r
emind you of the
boiling water.
Actived the boiling cue function
1. Touching the heating zone selection control
2. Touching the boiling
cue control , the zone indicator show “2L” .
Touching the boiling
c
ue
control again, the zone indicator show “3L”.
Touching the boiling
cue control
for the third time
, the zone indicator show “5L”.
Touching the boiling
cue control
for the fourth time
, the zone indicator show “0”.
Cancel the boiling cue function
1. Touching the heating zone selection control
2.
a: Touching the slider control, then the cooking zone will revert to the level
you selec t .
b: Touching the function control , then the cooking zone will revert to you
select.
• It is important that the water temperature is neither too hot nor too cold when
31
Loading ...
Loading ...
Loading ...