Loading ...
Loading ...
Loading ...
Pans do not become
hot and appears in
the display.
The induction hob cannot
detect the pan because it is not
suitable for induction cooking.
The induction hob cannot
detect the pan because it is too
small for the cooking zone or
not properly centred on it.
Use cookware suitable for induction
cooking. See section ‘Choosing the
right cookware’.
Centre the pan and make sure that
its base matches the size of the
cooking zone.
The induction hob or
a cooking zone has
turned itself off
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating
with one or two digits
in the cooking timer
display).
Technical fault.
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
Failure Display and Inspection
If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Pr
ob
lem
Pos
s
ible causes
W
h
at to do
F1-F6
Temperature sensor failure
Please contact the supplier.
F9-FA
Temperature sensor of
the
IGBT failure.
Please contact the supplier.
FC
T
he connection
between
the
display board and the main
board is fail
Please contact the supplier.
E1/
E2
Ab
normal supply voltage
Pl
ease inspect whether power
supply is normal.
Power on after the power
supply is normal.
E3/E4
Temperature sensor of the
ceramic glass plate Is high
Please restart after the
induction hob cools down.
E5
Temperature sensor of the
IGBT
Is high
Please restart after the
induction hob cools down.
if there are anyone zone of the flexible area
to be protected，the flexible
area
selection control will not be able to use。
The above are the judgment and inspection of common failures.
36
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hob.
The oven (according to the models )
Always keep small children away from the oven while it is in use.
Before cooking for the first time switch the oven on and allow it to heat up while empty. At this
point you may notice a slightly odour, this is perfectly normal and occurs as the protective
covering which surrounds the insulating panels is gently removed. This covering is designed
for transit purposes only and its removal will not affect the performance of your oven.
Prior to use simply wipe the oven interior with a damp cloth, it is then ready for cooking.
37
Loading ...
Loading ...
Loading ...