Loading ...
Loading ...
Loading ...
14
Sensor failure
Cause
A technical defect on the appliance
is possible.
Remedial action
Conduct a self-test on the appliance.
Low voltage
Cause
The mains voltage falls below
the permitted limiting value.
Remedial action
No button actuations are possible.
When the mains voltage reaches the
stipulated value again, the warning
message goes out. If the warning
message lasts for longer, inform the
energy supply company.
Appliance self-test
Before you call customer service,
conduct a self-test on the appliance.
z Switch off the appliance and wait
5 minutes.
Keep the door closed during this
time.
z Switching on the appliance.
z At the same time, press the setup
button and the alarm button
for 5 seconds.
The self-test programme starts.
Various messages appear in the facia
one after the other.
If an error is established during the
appliance self-test, the symbol
appears in the fascia and an error
message (e. g.
E04 = sensor error)
is displayed.
Inform the customer service of these
error messages.
If no error is established during the
appliance self-test, the preset tempera-
ture appears in the fascia after the test
has ended.
Loading ...
Loading ...
Loading ...