Loading ...
Loading ...
Loading ...
Operating the appliance en
13
2. Use the control ring to set the temperature.
3. Touch the s button.
The cooking time is highlighted in white in the
display.
4. Use the control ring to set the cooking time.
5. Press the Start/Stop button l to start.
The appliance starts heating.
When your dish is ready, use the On/Off button ÿ to
switch off the appliance.
Notes
■ If you have started the steaming S type of heating,
the cooking time only begins to count down once
the set temperature has been reached.
■ If you open the appliance door during steaming, the
appliance operation stops. After the appliance door
has been closed again, the appliance must first heat
up to the set temperature before the cooking time
continues to count down.
“Fill water tank?” message
This message appears if you set a type of heating and
the water tank is only half full.
If you think that the water in the water tank is sufficient
for the cooking procedure, you can start the appliance.
If not, fill the water tank to the "max" mark, slide it back
in and start the appliance.
Changing
After starting the appliance, the temperature is
highlighted. When you move the rotary selector, the
temperature is changed and applied immediately.
To change the type of heating, interrupt the operation
beforehand using the l Start/Stop button. Touch the
symbol for the type of heating. The type of heating
appears with the corresponding default temperature.
Note: When you change the type of heating, the other
settings are also reset.
After each use
:Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Moisture and dirt remain in the cooking compartment
after each operation. Therefore dry and clean the
appliance after each use. Also empty the water tank
after each use.
Drying the cooking compartment
:Warning – Risk of scalding!
The water in the evaporator dish may still be hot. Allow
it to cool before wiping.
1. Leave the appliance door ajar until the appliance has
cooled down.
2. Remove any dirt from the cooking compartment
immediately.
3. Wipe out the cooled cooking compartment and
evaporator dish with the cleaning sponge and dry
with a soft cloth.
4. Wipe the front of the units dry if condensation has
formed.
Emptying the water tank
The water tank must be emptied and dried after each
steam operation.
Caution!
■ Do not dry the water tank in the hot cooking
compartment. This will damage the water tank.
■ Do not clean the water tank in the dishwasher.This
will damage the water tank.
1. Open the appliance door.
2. Remove the water tank and empty the residual
water.
3. Thoroughly dry the seal in the tank cover and the
water tank recess in the appliance.
4. Insert the water tank into the water tank recess.
5. Close the appliance door.
_
7H[W
7H[W
Types of heating
P
V
¿
(QG
¿
&RRNLQJWLPH
6
7
8
%
`
V D
_
7H[W
7H[W
P
V
a&
6
VWDUW
VWRS
`
V D
9
Loading ...
Loading ...
Loading ...