Loading ...
Loading ...
Loading ...
7
Before the rst use, please take out all accessories from the package and read this manual
carefully. Please pay parcular aenon to operaonal instrucons and cauons to avoid any
injury or property damage. Please wash the inside of the lid and the inner pot with warm soapy
water, rinse and dry thoroughly. Wipe the outer housing with a clean damp cloth. Never immerse
the cooker housing in water or any other liquid. The inner pot, sealing ring and steam release
handle and all accessories are dishwasher safe. But never clean the lid and housing in a
dishwasher.
Remove and Install the An-Block Shield (not essenal)
The an-block shield can be
removed by pushing it on the
side to li it up. To install the
an-block shield, posion it
in place and press it down.
Remove and Install the Sealing Ring
The sealing ring can be removed by
pulling upwards from the sealing ring
rack in secons. To reinstall the sealing
ring, pressing it down into the rack
secon by secon. The sealing ring can
be installed on either side facing up.
Please note the following:
Prior to each use, inspect to make sure the sealing ring is well seated in the sealing ring
rack and the an-block shield is mounted properly on the steam release pipe. A properly
seated sealing ring can be shied, with a bit of eort, clockwise or an-clockwise inside
the sealing ring rack.
Aer use, remove any foreign objects from the sealing ring and an-block shield.
Keep the sealing ring clean to avoid odor. Washing the sealing ring in warm soapy water or
dishwasher can remove odor. However, it is normal for the sealing ring to absorb the smell
of certain acidic foods. That's why it is always a good idea to have more than one sealing
ring on hand. You can purchase addional sealing rings from www.InstantPot.co.uk.
Never pull the sealing ring by force, as the pulling may cause deformaon and aect its
funcon in sealing the pressure.
A sealing ring with cracks, cuts or other damages should not be used. A new sealing ring
replacement should be used.
1. Make sure the pressure cooking program has completed or press “Keep-Warm/Cancel” to
terminate the program.
2. Releasing pressure in one of the following approaches.
Loading ...
Loading ...
Loading ...