LUX-6-V2 User Manual

Loading ...

down, and the ashing green indicator on the “Timer” key changes to solid green.

4. To cancel the Timer operaon, press the “Keep-Warm/Cancel” key at any me.

5. Your Instant Pot starts cooking when the delay mer counts down to 0. Aer cooking, the

cooker will then enter the Auto “Keep Warm” cycle for 10 hours. Please Note:

 We highly discourage using the Timer funcon for perishable foods, such as meat and sh,

which may go bad when le at room temperature for hours. Cooked rice may yield overly

so texture due to long soaking me. It may also cause a layer of burned rice at the

boom of the pot if it is le in Keep-Warm mode for too long.

 The Timer funcon is not recommended for porridge, oatmeal or other foamy and scky

foods. Because of the possibility of these foods gumming up the oat valve causing it to

never seal and leading to overowing food content, it is highly recommended that your

Instant Pot not be le unaended during the preheat cycle. Since the delay funcon

implies leaving the unit unaended, we strongly recommend not using the mer funcon

for these types of food.



1. Follow steps in the "Cooking Preparaon" secon of this

manual. Keep the lid open to avoid pressure from building up

inside the cooker. An oponal glass lid can also be used.

2. Connect power cord. The LED display shows “OFF” indicang

that it’s in standby state.

3. Press “Sauté” key. For safety reasons, the maximum operaon

me of one “Sauté” cycle is 30 minutes.

4. Change the cooking temperature among “Normal”, “More”

and “Less” modes with the “Adjust” key. The "Normal" mode is

suited for regular sauté or browning. The "More" mode is for

sr-frying or blackening meat at higher temperature. The

"Less" mode is suitable for simmering, reducing juices or

thickening sauce. To avoid pressure building up, the lid cannot

be closed. If you accidentally close the lid, ashing "Lid" is

displayed to warn about wrong lid posion.

Cauon: parally closing the lid during sautéing could

cause the pressure to build up in the cooker. This can be

hazardous.

5. Heang starts automacally in 10 seconds aer the last key is

pressed. The “Sauté” program can be cancelled or you can

change the heang intensity at any me by pressing “Keep

Warm/Cancel” key.

6. When the designated temperature is reached, the LED display shows “Hot”.

7. When cooking nishes, the cooker beeps and goes to standby state. If you need more me,

simply press the “Sauté” key again.



Pressing the “Keep-Warm/Cancel” key in the standby state acvates the “Keep Warm” funcon.

When “Keep Warm” funcon starts, the me counts up by minutes for up to 10 hours. The "Keep

Warm" funcon can be used with or without the lid closed. You can also use an oponal glass lid

for this funcon. When it nishes, the cooker beeps and goes to standby state.

Loading ...

User Manual - Page 15