Loading ...
Loading ...
Loading ...
14
6. When the pressure cooking cycle nishes, the cooker beeps
and automacally goes into the "Keep Warm" cycle, called Auto
“Keep Warm” Cycle. The LED display shows an “L” on the rst
digit, such as "L0:02", to indicate the “Keep Warm” cycle and me
duraon. The clock counts up for 10 hours. If the 10 hour Auto
“Keep Warm” cycle nishes, the cooker goes into standby state.
It is not recommended to leave cooked rice in “Keep-
Warm” state for too long as it may aect the texture or
the taste of the food.
7. To serve the food, press “Keep-Warm/Cancel” to stop the keep
-warm cycle and open the lid according to the “Safe Lid Opening” secon of this manual.
When opening the lid, the inner pot may appear to be stuck on the lid by vacuum. This
is caused by contracon of air due to cooling. Please turn the steam release handle to
“Venng” to let in air to release the vacuum.
1. Follow steps in the "Cooking Preparaon" secon of this manual. The steam release handle
can be at either "Venng" or “Sealing” posions. An oponal glass lid can also be used.
2. Connect power cord. The LED display shows “OFF” indicang
that it’s in standby state.
3. Press “Slow Cook” key.
4. Change cooking duraon between 0.5 and 20 hours by
pressing the "+" or "-" key.
5. Select the desired cooking mode with the “Adjust” key. By
pushing the "Adjust" key repeatedly, you can adjust the
cooking mode to “Normal”, “More” and “Less” modes, which
correspond to medium, high and low in a common slow
cooker. If you need to change temperature you will need to
cancel and re-select.
6. Cooking starts automacally in 10 seconds aer the last key is pressed.
7. When the cooking nishes, the cooker beeps and goes into the Auto "Keep Warm" cycle for
10 hours.
Your Instant Pot has a mer funcon to delay the start of cooking
for up to 24 hours. Timer funcon does not apply to the “Keep
Warm”, and "Sauté" funcons. The following shows how to
program for delayed cooking.
1. Follow steps in the previous “Pressure Cooking” and “Slow
Cooking” secons to set a cooking program.
2. Within 10 seconds aer program selecon, press the “Timer”
key to set the hours and minutes to be delayed. Use “+” and “-
“ to set the delayed hours. Press "Timer" key again to change
the minutes. The me is the delayed me before the program
starts. Please allow sucient cooking me and cooling down
me before serving.
3. 10 seconds aer last key press, the “Timer” funcon starts, the me on LED display counts
Loading ...
Loading ...
Loading ...