Loading ...
Loading ...
Loading ...
18
www.InstantPot.co. uk/faq/
8
Display remains blank
aer connecng the
power cord
Bad power connecon or no
power.
Inspect the power cord to
ensure a good connecon,
check the power outlet is
acve.
Cooker’s electrical fuse was
blown
Contact support online
9
All LEDs
ash with
a code
appearing
on screen
C1 code Faulty temperature sensor
(cannot be detected)
Contact support online
C2 code Faulty temperature sensor
(short circuited)
Contact support online
C5 code Temperature is too high be-
cause inner pot is not placed
Put in the inner pot properly
Temperature is too high be-
cause there is no water in
inner pot
Put food and water in the
inner pot
C6 code Faulty pressure sensor Contact support online
10
Rice half cooked or too
hard
Too lile water Adjust dry-rice and water
rao according to recipe
Cover opened prematurely Aer cooking cycle com-
pletes, leave the cover on for
5 more minutes
11 Rice too so Too much water Adjust dry-rice and water
rao according to recipe
12
Intermient beeping
aer the cooker starts
for a while
Indicaon of overheang.
The cooker has reduced the
heang temperature, and
may not reach cooking pres-
sure
Possibly starch deposits at
the boom of the inner pot,
which have clogged heat
dissipaon. Stop the cooker
and inspect the boom of
the inner pot
Occasional cking or
light cracking sound
The normal sound of power
switching and expanding
pressure board in changing
temperature
Nothing to be worried about
13
Wet inner pot boom. Wipe inner pot boom dry
before cooking
Troubleshoong Table (Cont… )
Problem Possible Reason Soluon
Steam comes out from
exhaust valve non-stop
Steam release handle not in
sealing posion
Turn the release handle to the
sealing posion
6
Pressure control fails Contact support online
7
Display ashes “Lid” Lid is not at the correct posi-
on for the selected program
Close lid for pressure cooking
or open the lid for sautéing
Loading ...
Loading ...
Loading ...