Loading ...
Loading ...
Loading ...
This light has two functions:
This indicator comes on when you
turn the ignition switch ON (II). It
is a reminder to check the parking
brake. Driving with the parking
brake not fully released can
damage the brakes and tires.
If the indicator remains lit after
you have fully released the
parking brake while the engine is
running, or if it comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page .
See page .
The left or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page ). Replace the bulb as
soon as possible, since other drivers
cannot see that you are signalling.
WhenyouturnontheHazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the car should flash.
This light comes on if the hatch is
not closed tightly.
This indicator lights when you turn
the ignition switch to ON (II) with
the headlight switch off and the
parking brake set. It should go off if
youturnontheheadlightsorrelease
the parking brake. If it comes on at
any other time, it means there is a
problem with the DRL. There may
also be a problem with the high
beam headlights.
This light comes on with the high
beam headlights. See page for
information on the headlight
controls.
On Canadian models, this indicator
comes on with reduced brightness
when the Daytime Running Lights
(DRL) are on (see page ).
1.
2.
236
200
238
67
66
Canadian models only
Indicator Lights
Instruments and Controls
Parking Brake
and Brake
System
Indicator
Malfunction Indicator
Lamp
Turn Signal and
Hazard Warning
Indicators
Hatch-open Indicator
‘‘Daytime Running
Lights’’ Indicator
High Beam Indicator
59
U.S. Canada
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...