Loading ...
Loading ...
Loading ...
Torque the spark plug. (If you do
not have a torque wrench, tighten
the spark plug two-thirds of a turn
after it contacts the cylinder head.)
Tightening torque:Put the new spark plug into the
socket, then screw it into the hole.
Screw it in by hand so you do not
crossthread it.
Remove the spark plug with a 16
mm (five-eighths inch) spark plug
socket.
Remove the ignition coil.
Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
Use a wrench to remove the bolt
holding the ignition coil. Pull the
ignition coil up slightly.
8.
7.
6.3.
4.
5.
Spark Plugs
Maintenance
182
BBOOLLTT
IIGGNNIITTIIOONN CCOOIILL LLOOCCKK TTAABB
CCOONNNNEECCTTOORR
13 lbf·ft (18 N·m , 1.8 kgf·m)
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...