Loading ...
Loading ...
Loading ...
English - 20
STEP 5 - Powering your washing machine
Plug the power cord into a wall socket, an AC 220 - 240 V / 50 Hz approved electrical outlet protected by a fuse or
circuit breaker. (For more information on the electrical and grounding requirements, refer to the "Electrical supply
and grounding” section on page 13.)
Test run
Make sure that you install your washing machine correctly by running the Rinse+Spin cycle after the
installation is complete.
STEP 6 - Setting the LCD display language
When you turn on your washing machine for the first time, the “Language
Setting” screen appears on the LCD display. Follow the steps below to set
the LCD display language.
Available LCD display languages may differ depending on the
model.
1. Press the Rinse button repeatedly until a suitable LCD display
language is indicated.
2. Press the Spin button to set the currently indicated language as the
LCD display language.
If you want to change the LCD display language, hold down the Rinse and Spin buttons at the same time
for 3 seconds.
STEP 7 - Running Calibration Mode
Your Samsung washing machine detects the weight of the laundry automatically. For a more accurate weight
detection, it is recommended running Calibration Mode immediately after installing the washing machine. Follow
the steps below to run Calibration Mode.
Before running Calibration Mode, make sure that there is nothing in the drum or on top of the washing
machine.
1. Turn the washing machine off.
2. Press the Power button while holding down the Temp. and Delay End buttons simultaneously. The washing
machine will turn on and “Calibration Mode” will appear on the display.
3. Press the Start/Pause button to start Calibration Mode.
4. The drum will rotate clockwise and counter-clockwise for about 3 minutes.
5. When Calibration Mode is complete, “Cycle is complete” appears on the display and the washing machine
will turn off automatically.
6. The washing machine is now ready for use.
Untitled-16 20 10/5/2016 3:43:43 PM
Loading ...
Loading ...
Loading ...