Loading ...
Loading ...
Loading ...
Cleaning and care
19
ENEN
Cleaning the frothing nozzle for
cappuccino
Clean the frothing nozzle for cappuccino
immediately after use.
1. Turn the steam knob to let a little steam
out and drive out any milk inside the
nozzle.
2. Shut off the coffee machine by pressing
the ON/OFF switch.
3. Hold the tube of the frothing nozzle (1)
still with one hand and use the other to
rotate the frothing nozzle (2)
anticlockwise and pull it off downwards.
4. Remove the rubber connecting nozzle (3)
from the frothing nozzle tube by pulling it
downwards.
5. Wash the frothing nozzle and rubber
connecting nozzle thoroughly with warm
water.
6. Check that the hole (4) is not blocked.
7. Insert the rubber connecting nozzle (3)
back into the frothing nozzle tube (1)
then replace the frothing nozzle (2) by
pushing it upwards and rotating it
anticlockwise.
8. Refit the frothing nozzle in its housing by
following the cleaning instructions in
reverse.
Cleaning the boiler outlet
The boiler outlet must be rinsed every 200
coffees made by dispensing approximately
500 ml of water by pressing the coffee
dispense button without adding ground
coffee or a soft pod.
Cleaning the water tank
Clean the water tank once a month using a
moist cloth and mild detergent.
1
2
3
4
Loading ...
Loading ...
Loading ...