Loading ...
Loading ...
Loading ...
15
1
cold
2 colder
3 colder
4
colder
5
coldest
Temperature control operation
1. Initial setting of fresh compartment control panel is 3, for the freezer compartment, the initial
setting is Mid position.
2. If the ambient temperature in the fresh food compartment is too cold, press the SET button to go
to
a
lower
number
setting
(1
or
2),
the
freezer
compartment
control
knob
should
be
placed
in
the
COLDER
position.
3. If the ambient temperature is too warm in the fresh food compartment press the SET button to a
higher
number
(4
or
5)
position,
the
freezer
compartment
control
knob
should
be
placed
in
Mid~
COLDER
position.
This
could
require
many
adjustments
to
achieve
your
preferred
setting.
Tips:
When
the
frozen
compartment
control
knob is
placed
in
COLD
position,
the
fresh
compartment
will
be
more
rapidly
cooled,
but
if
left
in
the
COLD
position for a long time, the temperature
inside
fresh
compartment
may
be
reduced
to
below
freezing.
(default)
• The first time you turn the refrigerator on, the control panel LEDs turn on for 3 seconds, the display will
show the current setting (default = 3). Your refrigerator will then run continuously for several hours until it
reaches the preset temperature. After your refrigerator is fully cooled, you can adjust the temperature up or
down to your personal preference.
• To temporarily suspend cooling in the refrigerator and freezer, press and hold the SET button for 3
seconds. The STANDBY LED turns on and cooling is turned off. Press the SET button again to cancel
standby mode and resume cooling.
1 SET button: Press to change the refrigerator setting from 1 (cold) to 5 (coldest).
2 LED indicators Light to show the current refrigerator setting.
3 STANDBY LED Lights to indicate when the refrigerator is in standby mode
(refrigerator and freezer are turned off ).
• If the refrigerator is unplugged or loses power, you must wait three to five minutes before restarting it. If you
attempt to restart before this time delay, the refrigerator will not start.
• Large amounts of food will lower the cooling efficiency of the refrigerator.
• If you choose to change the thermostat setting, adjust it by one increment at a time. Allow 24 hours for the
temperature to stabilize between adjustments.
Loading ...
Loading ...
Loading ...