Loading ...
Loading ...
Loading ...
9
1) Unplug refrigerator from wall outlet.
2) Remove ice tray rack from freezer .
3) The frozen shelf moved to the next partition.
5) Peel off label covering ice maker hole on back of the refrigerator.
6) With needle nose pliers, remove foam from hole.
7) Push water inlet tube into small hole on back of
refrigerator. Rotate while inserting tube until
flat
surface of inlet tube is tight against back of
refrigerator.
8) Push plastic water supply tubing (3) into water inlet
tube (11) as far as it will go and finger
tighten nylon
compression nut onto threaded end of inlet tube.
Tighten another one half
turn with a wrench.
DO NOT
over tighten.
4)
Remove
plug
from
inside
the
freezer.
Loading ...
Loading ...
Loading ...