Loading ...
Loading ...
Loading ...
11
14) Reinstall freezer shelf in lower position. Set ice
container (2) on shelf.
15) Locate factory punched holes at bottom right corner
of rear panel. Holes are drilled through
the cabinet
liner. Align water valve bracket with factory drilled
holes. Use a power drill with a
Phillips
®
head bit to
drive the two self
drilling screws (4) through bracket
and into cabinet.
16) Connect wiring harness to water valve. Make sure
connection is tight.
17) Push plastic water supply tubing into bottom of water
valve as far as it will go. Finger tighten
nylon
compression nut onto threaded end of water valve.
Tighten another one half turn
with wrench.
DO NOT
over
tighten.
18) Secure plastic water tubing to rear of cabinet with two plastic clamps (9). NOTE：Clean back
of cabinet with a commercial household cleaner, ammonia or alcohol before applying clamps.
Loading ...
Loading ...
Loading ...