Loading ...
Loading ...
Loading ...
8
2. Open both doors again to make sure they close as easily as
you like and that they stay closed. If not, tilt the refrigerator
slightly more to the rear by turning both leveling screws to the
right. It may take several more turns.
NOTES:
■ To keep the refrigerator level, you should turn both
leveling screws the same amount.
■ On models with the leveling/roller assembly, after
adjusting the refrigerator to the desired tilt, turn the
leveling leg until it is rmly against the oor as shown.
3. Using a level, be sure that the refrigerator is still level side to
side. Readjust if necessary.
On some models
4. Replace the base grille.
Door Aligning
If the space between your doors looks uneven, you can adjust it
using the following instructions:
1. Loosen the top hinge screws using a 5/16" socket or wrench.
2. Have someone hold the door in place or put a spacer
between the doors while you tighten the top hinge screws.
3. Replace the top hinge cover, if removed in Step 1.
REFRIGERATOR USE
Using the Controls
Depending on your model, your refrigerator either has controls
that affect the temperature. The Temperature control located at
the top front of the refrigerator compartment and/or the Airow
control located on the back wall of the freezer compartment.
Follow the instructions specic to your model.
IMPORTANT:
■ The recommended setting should be correct for normal
household refrigerator use. The controls are set correctly
when milk or juice is as cold as you like and when ice cream
is rm.
■ Wait 24 hours for your refrigerator to cool completely before
adding food. If you add food before the refrigerator has
cooled completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer temperature
controls to a colder than recommended setting will not cool
the compartments any faster.
■ If the temperature is too warm or too cold in the refrigerator
or freezer, rst check the air vents to be sure they are not
blocked before adjusting the controls.
Temperature Control (on some models)
The control panel is located at the top front of the refrigerator
compartment.
For your convenience, the temperature control is preset at the
factory. When you rst install your refrigerator, make sure the
control is still set to the recommended setting as shown.
Recommended Setting “3 Snowakes”
Cooling Off/On
■ Press and hold TEMP for 3 seconds to turn cooling off.
To turn cooling back on, press and hold TEMP again for 3
seconds.
NOTE: Neither compartment will cool when the control is set to
OFF.
Additional Features
Filters Reset (on some models)
The Filters Reset control allows you to restart the lter status
tracking feature each time you replace the air lter or water lter.
■ Press and hold FILTERS RESET for 3 seconds. The lter
icons will turn off. See “Install Air Filter” and “Water Filtration
System.”
Temperature Control (on some models)
For your convenience, the Temperature control is preset at the
factory. When you rst install your refrigerator, make sure the
control is still preset as shown.
Recommended Setting
Cooling Off/On
■ To turn cooling off, press and hold the Setting button for 4
seconds until all lights are illuminated for 1 second. To turn
cooling back on, press and hold the Setting button again for
4 seconds.
NOTE: Neither compartment will cool when the control is set
to OFF.
Adjusting the Temperature Control (depending on model)
If you need to adjust the temperature in either the refrigerator or
freezer compartment, use the settings listed in the chart below as
a guide.
C
B
A
A. Bottom hinge
B. Screws
C. Leveling/roller assembly
Loading ...
Loading ...
Loading ...