Loading ...
Loading ...
Loading ...
19
USING YOUR REFRIGERATOR
SETTING THE CONTROLS
NOTE: The dispenser will not work if any door is left open
or if the control lock is engaged.
NOTE: If the lock icon is illuminated, you can not control
the dispenser type. Please check the control lock ON/OFF
mode on the control panel.
CAUTION: The control display is operated by touch.
Excessive moisture on the display may cause a
malfunction. Please keep the display clean and dry.
The Refrigerator Temp Control ranges from 33°F to •
46°F (1°C to 8°C). Press the Refrigerator Temp button
to cycle through the available temperature settings one
increment at a time.
The Freezer Temp Control range is from -6°F to 8°F •
(-21°C to -13°C). Press the Freezer Temp button to cycle
through the available temperature settings one increment
at a time.
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. The controls are set
correctly when milk or juice is as cold as you would like
and when ice cream is fi rm. If the temperature in either
compartment is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the change to
stabilize before adjusting again.
Dispenser
When you press the water icon (1), the icon will •
illuminate.
When you press the cubed ice icon (2), the icon will •
illuminate.
When you press the crushed ice icon (3), the icon will •
illuminate.
Some dripping may occur after dispensing. Hold your •
cup beneath the dispenser for a few seconds after
dispensing to catch all of the drops.
Airfl ow
Be sure not to block vents while packing your refrigerator.
Doing so will restrict airfl ow and may cause the
refrigerator temperature to become too warm or cause
interior moisture buildup. (See air fl ow diagram below.)
Temperature
1
2
3
Loading ...
Loading ...
Loading ...