Loading ...
Loading ...
Loading ...
English - 29
BASIC OPERATIONS
Washing for the first time
1. Place the laundry into the tub, add an appropriate amount of detergent, and then close the
door. For eective washing, add detergent and bleach into the tub before adding the laundry.
2. Press the POWER button.
3. Press the Baby care or Course (Cycle) button to select a cycle.
4. Press the Water Level/Temp. button to specify the water level according to the laundry load,
and then select the water supply type (cold or hot water).
High Mid Low
3.90 lbs or less 3.45 lbs or less 3.00 lbs or less
The default water level is set for each cycle, and the default water supply type is cold water.
5. Press the Extra Rinses button to select the number of rinse cycles.
(The number of rinse cycles cannot be changed during the last rinse cycle or the spin cycle.)
6. Close the door.
7. Press the START/PAUSE button.
• To change the wash cycle, press the START/PAUSE button, select a cycle, then press
the START/PAUSE button again.
• If you want to add the soak cycle, press the Soak button before starting the wash. The
Soak cycle is not available for the following cycles: Delicates, Quick Wash, Rinse +
Spin, Spin, or Self Clean.
Untitled-6 29 2015-01-02 12:51:40
Loading ...
Loading ...
Loading ...