Loading ...
Loading ...
Loading ...
English - 20
Step 5 - Level the washer
1. Choose a location with a minimum clearance of 4 in (10 cm)
from the rear and side walls.
2. Attach the provided two levelling devices to the front and
side, respectively. Then, check if the washer is level within
tolerance.
3. If the washer is not level, adjust the leveling feet.
4. To check if the washer is stable, press any two diagonal
corners of the washer. If it shakes, adjust the leveling feet.
WARNING: Do not reach under the washer with a hand or with any metal objects while the
washer is operating. This may cause a physical injury or electric shock.
After installation is complete, run the Rinse + Spin cycle to make sure the washer works
properly.
Untitled-6 20 2015-01-02 12:51:39
Loading ...
Loading ...
Loading ...