Loading ...
Loading ...
Loading ...
English - 16
6. Connect the water supply hoses (E) to the water valves of
the existing washer as shown.
Connect the hose marked "Cold" to the cold water valve and
the hose marked "Hot" to the hot water valve.
E
7. Make sure you have connected the hoses properly as shown
and check if there is a water leak.
CAUTION: When you finish washing the laundry, close the water taps. Otherwise, the
following may occur:
• If the water taps are not closed or not connected properly, water may leak especially in
winter.
• If the water taps are not closed, the supplied water may freeze inside the water hoses.
• The water taps or hoses could burst at a low temperature.
Untitled-6 16 2015-01-02 12:51:38
Loading ...
Loading ...
Loading ...