Loading ...
Loading ...
Loading ...
1 Place a bowl under the hot water/steam wand or classic milk frother
and the coffee spout. Make sure the control dial points to the coffee
bean icon.
2 Press the on/off button.
3 When the warning light ashes quickly, turn the control dial to the
hot water icon and wait a few seconds.
, The warning light goes out and some water comes out of the hot
water/steam wand or classic milk frother.
4 After a few seconds, when hot water stops coming out of the hot
water/steam wand and the warning light ashes slowly, turn the
control dial back to the coffee bean icon.
, The machine is heating up and the on/off button ashes slowly.
, When the machine has heated up, it performs an automatic rinsing
cycle to clean the internal circuit with fresh water. Water ows from
the coffee spout.
, When the on/off button illuminates continuously, the machine is
ready for the manual rinsing cycle.
Note: You can stop the automatic rinsing cycle by pressing the espresso button
or the regular coffee button.
Note: The automatic rinsing cycle also takes place 15 minutes after the
appliance switches to standby mode or turns off.
ENGLISH12
Loading ...
Loading ...
Loading ...