Loading ...
Loading ...
Loading ...
4-24
How to print correctly
Problem Recommendation
The printer prints unexpectedly
or it prints garbage.
• Make sure the printer cable is not too long. We recommend you
use a parallel cable of less than 2 metres (6.6 feet) in length.
• Check if the printer cable is damaged or broken.
• If you are using an interface switching device, remove it and
connect your computer directly to your printer and try again.
• Check that the appropriate printer driver is selected as ‘Set as
Default’.
• Check that the printer is not connected to the same port which is
also connected to a mass storage device or scanner.
Remove all other devices and connect the port to the printer
only.
Turn off printer status reporting in the device options tab in the
printer driver.
The printer cannot print full
pages of a document. An error
message “PRINT OVERRUN”
occurs.
• Press the panel button to print the data remaining in the printer.
• If this does not clear the error, reduce the complexity of your
document or reduce the print resolution.
(HL-1250 Only)
• Expand the printer memory by adding a commercially available
SIMM. Refer to ‘How to add extra Memory’ in Chapter 2. Set
page protection to ON by using the supplied Windows driver or
RPC program.
• Change the following settings in the supplied Windows driver
and try again. The best combination of settings below will vary
depending on your document.
Graphics Mode
True Type
TM
mode
Use Printer True Type
TM
Fonts
The printer cannot print full
pages of a document. A
"MEMORY FULL" error
message occurs.
• Press the panel button to print the data remaining in the printer.
• Reduce the print resolution or reduce the complexity of your
document.
(HL-1250 Only)
• Expand the printer memory by adding a commercially available
SIMM. Refer to ‘How to add extra Memory’ in Chapter 2.
Loading ...
Loading ...
Loading ...