Loading ...
Loading ...
Loading ...
English 45
Warranty and service
Information code Possible cause Solution
C0 Check the Auto Cook sensor. Restart the appliance using the Power
button. If the problem continues,
disconnect power for more than 30
seconds. Then, restart the appliance and
try again. If the problem still continues,
contact a local service center.
C1 The temperature is sensed higher
than specied.
C2 Check the Auto Cook sensor.
A2 The DC Motor fails to operate
because of problems with the PCB
or wiring, or electrical disturbance
on the motor blade.
d0 The sensor is pressed for more
than 8 seconds.
Check if the sensor pad is wet or pressed.
If the problem continues, restart the
appliance using the Power button. If the
problem still continues, contact a local
service center.
F0 Communications between main
and sub PCBs fail.
Restart the appliance using the Power
button. If the problem continues,
disconnect power for more than 30
seconds. Then, restart the appliance. If
the problem still continues, contact a local
service center.
F2 The touch-enabled IC
communicates abnormally.
NZ84J9770EK_EU_DG68-00630A-01_EN.indd 45 2015-01-30 4:38:01
Loading ...
Loading ...
Loading ...