Loading ...
Loading ...
Loading ...
12 English
Installing the hob
Installing the hob
Connecting to the mains power supply
Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated
on the rating plate, corresponds to the available supply voltage. The rating plate is located on
the lower casing of the hob.
WARNING
Shut off power to circuit before connecting
wires to circuit.
The heating element voltage is AC 230 V
~
.
The appliance also works perfectly on
networks with AC 220 V
~
or AC 240 V
~
.
The hob is to be connected to the mains
using a device that allows the appliance to
be disconnected from the mains at all poles
with a contact opening width of at least
3 mm, eg. automatic line protecting cut -
out, earth leakage trips or fuse.
WARNING
The cable connections must be made
in accordance with regulations and the
terminal screws tightened securely.
WARNING
Once the hob is connected to the mains
supply, check that all cooking zones are
ready for use by briey switching each on
in turn at the maximum setting with suitable
cookware.
WARNING
Pay attention (conformity) to phase and
neutral allocation of house connection and
appliance (connection schemes); otherwise,
components can be damaged.
Warranty does not cover damage resulting
from improper installation.
WARNING
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualied persons in order
to avoid a hazard.
NZ84J9770EK_EU_DG68-00630A-01_EN.indd 12 2015-01-30 4:37:48
Loading ...
Loading ...
Loading ...